Model licence: Standard Digital File License
The AMD BC-250 is a board from crypto mining rigs that runs the same processor as the PlayStation 5. It is cheap, and with a Linux gaming system (PikaOS, for example) it becomes quite a powerful console. But it comes completely bare - no case, and cooling designed for a cabinet full of fans. This case turns it into a proper device that can sit under your TV.
The picture at the top is a rendering of the case from the CAD model.
What I changed from the original
I started from the fully printed Case ATX PSU & Fan Duct by ZMASLO and turned it into a hybrid: a printed frame plus flat side and top panels. This design is much stiffer and looks like factory-made hardware rather than a print.
- Panels for laser or CNC cutting - you cut the top and side panels from flat sheets.
- Removable panels - you get inside in a moment, so cleaning, tidying cables or swapping parts is no trouble.
- A shorter case than the original.
- New vents - at the front a large honeycomb grille lets in plenty of cold air, and extra slots help get rid of the heat.
- Room for a logo at the front, Steam for example.
Version 2 added, among other things, a better front mount for the board, a firmer fan mount, a guide that lines up the front with the back, fewer mounting holes in the panels and better fitting joints.
Cooling and power
The BC-250 can get very hot. The case is designed for an ordinary ATX power supply - I recommend at least 600 W with a native 8-pin connector, so there are no voltage drops. There is plenty of room inside to hide unused cables.
Very efficient fans fit at the front (even up to 3000 rpm), and the hot air from the processor goes straight out through an exhaust duct at the back.
What you need
- an AMD BC-250 board
- an ATX power supply, ideally at least 600 W with a native 8-pin connector
- efficient fans for the front of the case
- M3 x 5 threaded inserts to join the frame parts
- M3 x 12 screws for plastics - to fasten the panels
- 4 mm sheets for the panels: ABS for a prototype, aluminium for the final version
Printing and cutting
- Frame - from ordinary materials: PETG, ABS or ASA.
- Exhaust duct - it touches the processor's hot heatsink, so print it from a heat-resistant material: HT PLA (withstands up to 150°C), ABS or PC. Ordinary PLA or PETG could deform.
- Panels - from 4 mm sheets. For a prototype, CNC-cut ABS works great, and for the final version I recommend aluminium.
